Address: No.2 Sanheng Road, Dabu Road, Qinghu Village, Junhe Street, Baiyun District, Guangzhou City
What Is a 150W LED Beam Light? Specs, Uses & Manufacturer
A 150W LED beam light is a compact moving head with a 1.5° beam angle for aerial effects, gobo projection, and stage accent lighting.
What Is a 150W LED Beam Light?
A 150W LED beam light is a compact, single-source moving head that produces a very narrow beam of light — typically around 1.5° — for sharp aerial effects, gobo projection, and fast-moving accent lighting. The “150W” rating refers to the LED engine’s power draw, not the fixture’s total consumption, so it draws less power than older discharge-lamp beam fixtures while delivering comparable punch. It is a common workhorse in mobile DJ rigs, small-to-mid-size venues, and rental fleets.
What Makes It a Beam Light
Beam lights are a distinct family of moving heads, defined by a tight, collimated beam that reads clearly through haze or smoke. Unlike a spot fixture, which has a wider beam and frost options, or a wash fixture, which is designed for even color mixing, a beam light concentrates light into a thin shaft that can be aimed, spun, and pointed quickly. The 1.5° beam angle is what gives the classic “searchlight” look on stage.
The 150W LED beam light achieves this with a single LED source positioned in front of a precision optical lens system. That narrow output is then manipulated by a series of effects tools mounted inside the fixture head:
- A gobo wheel with 13 gobos plus an open position, allowing text, shapes, and patterns to be projected as crisp, focused images.
- A color wheel with 13 colors plus white, for fast color changes or split-color effects.
- A rotating prism system offering both 5-facet and 8-facet prisms, so a single beam can be multiplied into a fan or flower of beams.
- A 15-channel DMX control mode, giving the operator independent control over pan, tilt, color, gobo, prism, and movement.
Because the LED source is small and efficient, the fixture body stays compact. The unit weighs 7 kg net, which is light enough for a single technician to handle during setup. It also runs on any standard mains supply from 100V to 240V, making it usable internationally without a separate power converter. You can view the broader range of beam fixtures in the YC Light beam light category.
Key Specifications
The table below summarizes the main specifications of this 150W LED beam light as configured by the manufacturer.
| Specification | Value |
|---|---|
| Input voltage | 100V-240V~50Hz/60Hz |
| Rated power | 220 W |
| Gobo | 13+1 |
| Color wheel | 13+1 |
| Prism | 5+8 |
| Beam angle | 1.5° |
| Control channel | 15CH |
| Net weight | 7 KG |
| Gross weight | 8.5 KG |
| Size | 44×30.5×31.5cm (1in 1) |
How It Is Used and Where You Will See It
The 150W LED beam light is a fixture designed for speed and impact. Its narrow beam means it is almost always used with haze or smoke in the air, so the beam path becomes visible. Once the atmosphere is prepared, it works equally well as a moving accent light and as a pure effect fixture.
- Concerts and touring. Small clubs and regional stages use beam fixtures to create crowd-sweeping aerial fans. The 5-facet and 8-facet prisms create multi-beam looks from a single fixture.
- Nightclubs and bars. Fast pan and tilt movement, quick color changes, and gobo flashes fit the tempo of music-driven environments.
- Weddings and private events. The fixture’s compact size and quiet LED operation make it suitable for ballroom trusses, while the gobo wheel can project monogram-style patterns.
- Corporate events and product launches. Sharply defined beams add structure to stage designs without washing out presentation screens.
- TV studios and rental companies. The universal input voltage and standard DMX protocol make it easy to slot into existing control systems.
Since air volume is the main design constraint in these settings, the fixture’s 44 x 30.5 x 31.5 cm body and 7 kg weight are practical advantages. A rigger can pre-aim and cable a dozen of these units in roughly the same time an older 575W discharge fixture would take.
Buying Considerations
When purchasing a 150W LED beam light, evaluate the fixture as a system, not just on peak brightness. The optical train determines sharpness, the motors determine movement speed and noise, and the control software determines how easily it integrates into a show.
- Beam quality. At a 1.5° angle, any imperfection in the lens or LED alignment becomes visible in the beam edge. A manufacturer that controls optical lens alignment during production is preferable.
- Power flexibility. The 100V-240V input range should be confirmed before ordering for international use.
- Certification and testing. For permanent installation, verify that the fixture meets the relevant requirements. YC Light holds CE (EMC & LVD) and RoHS certification, and operates SMT PCB lines, DMX test equipment, and high-temperature aging chambers in its production process. See the certifications page for details.
- Ordering and customization. As a source factory in Guangzhou, YC Light offers OEM and ODM services, including custom colors, custom DMX protocols, branded packaging, and new designs. If you need a white-body version or a specific gobo set, check the full products page to understand the available base configurations.
- Warranty and inspection. Look for a manufacturer that performs pre-production sample confirmation and final inspection before each shipment and offers a one-year warranty.
If you are buying in bulk, also discuss payment terms. YC Light accepts T/T, L/C, PayPal, and Western Union in USD or EUR, with FOB and EXW delivery options. Sales staff support English, Chinese, and Spanish, which simplifies communication for buyers in North America, Europe, and Southeast Asia.
Frequently Asked Questions
What does “13+1 gobo” mean?
The “13+1” notation means the gobo wheel holds 13 patterned gobos plus one open position. The open position lets the light pass through without a pattern, so the operator can switch between a clean beam and a projected texture. The same notation is used for the color wheel, where “13+1” means 13 colors plus white.
How many DMX channels does this beam light use?
It uses a 15-channel control mode. In DMX, each channel carries one piece of information, such as pan, tilt, color, gobo, or prism rotation. Fifteen channels give full control over all fixture functions, including the gobo shake and prism macros, while still leaving room on a universes for additional fixtures.
Can this 150W LED beam light run on both 110V and 220V power?
Yes. Its input voltage is rated at 100V-240V~50Hz/60Hz, so it will accept both North American 110V-120V mains and European/Asian 220V-240V mains without modification. For international touring, use the correct power cord and verify that the venue’s outlets match your connectors.
Contact YC Light
If you are sourcing a 150W LED beam light for a rental fleet, a permanent installation, or a custom project, the YC Light team in Guangzhou can provide specifications, samples, and a quotation. Contact the sales team through the contact page for a direct reply about pricing, delivery, and OEM options.